Problem :
I have found that after several weeks of constant "not responding" messages while doing a search function on any of the three major search engines - when I made Google Chrome my default browser that all problems ceased.
But silly me...I continued to click on the "e" on my desktop to access the internet and that was going back to internet Explorer as the browser so I deleted all the "e" shortcuts from the desktop, task bars, etc and just click on the Google icon to access the internet and all worked out perfectly. I know that I didn't have to "delete" the "e" shortcuts but why leave clutter on the desktop if I won't be using them anymore.
Answer :
Optimize your web browser by resolving Internet Explorer not responding error encountered on your computer.
Each step is accompanied by an indicative screenshot for the ease of mirroring the action.
Did you know that you can resolve more than 90% of technical problems, quickly and easily? Click on each step in the vertical menu to the left of this page or click on the ‘Previous’ or ‘Next’ buttons at the bottom of this section to navigate through the solution.
* Click on ‘Start’
* Hold down ‘Ctrl,’ ‘Alt,’ ‘Del’
* Click ‘Control Panel’
* Click ‘Add/Remove Programs’
* Open ‘My Computer’
* Click ‘Restart’
Get more information :http://social.technet.microsoft.com/Forums/en/ieitpropriorver/thread/7803a483-c360-4bc1-8e4c-a60cd3bdbd1d
Thursday, August 11, 2011
Wednesday, August 10, 2011
Fix Printer Spooler Error
Problem :
Trying to share a printer on my XP PC with a Windows 7 laptop on our network - I am able to print a test page from the laptop, but when I try to print an e-mail, I get "Spooler Subsystem App has encountered a problem and needs to close." The only way I can clear it is to restart my PC.
Solution :
Check the following steps to fix printer spooler error :
Go to Start / Run and type in "services.msc" without quotation marks, then press Enter or click OK.
In the window that opens (Services) look for "Print Spooler" on the right
Right-click "Print Spooler" and select "Properties".
Click on the "Recovery" tab and change all 3 drop-down boxes to "Restart The Service".
Make sure the 2 text boxes underneath say "1" in them.
Click Ok until you are back at the Services window, close it and you're good to go.
Go back into the properties of the "Print Spooler" tab and be sure to click Start to restart the Print Spooler service and it will restart the service immediately.
The Print spooler depends on the Remote Procedure Call (RPC) service. Is this service disabled? Go to services.msc look for RPC. Check state: Automatic
Get more information : http://www.tomshardware.com/forum/253503-45-printer-spooler-error
Trying to share a printer on my XP PC with a Windows 7 laptop on our network - I am able to print a test page from the laptop, but when I try to print an e-mail, I get "Spooler Subsystem App has encountered a problem and needs to close." The only way I can clear it is to restart my PC.
Solution :
Check the following steps to fix printer spooler error :
Go to Start / Run and type in "services.msc" without quotation marks, then press Enter or click OK.
In the window that opens (Services) look for "Print Spooler" on the right
Right-click "Print Spooler" and select "Properties".
Click on the "Recovery" tab and change all 3 drop-down boxes to "Restart The Service".
Make sure the 2 text boxes underneath say "1" in them.
Click Ok until you are back at the Services window, close it and you're good to go.
Go back into the properties of the "Print Spooler" tab and be sure to click Start to restart the Print Spooler service and it will restart the service immediately.
The Print spooler depends on the Remote Procedure Call (RPC) service. Is this service disabled? Go to services.msc look for RPC. Check state: Automatic
Get more information : http://www.tomshardware.com/forum/253503-45-printer-spooler-error
Friday, July 29, 2011
Fix Windows 7 Black Screen
Problem :
windows 7 black screen, I fully understand the directions for seting up a genuine copy of windows 7, however i've missed the deadline for comfirming a genuine copy of windows 7 is there any way to resolve this problem or will i have to download another copy
notice that this copy of windows 7: is AKA (windows 7 ultimate) any and all help apprecatied, thank you
Solution :
You may also face the Black Screen on your PC after you have logged on to your computer.
In this case the only thing that you might find is the My Computer Explorer Window.
To fix this problem, restart the computer and wait till the black screen is visible.
After verifying that the PC is connected with the net press simultaneously the CTRL, ALT, and DEL key.
Now click the Application Tab on the Task Manager and then on the New Task.
Here you have to type the command “C:\Program Files\Internet Explorer\iexplore.exe” along with the website name within “ ” from where you want to download the iexplorer.exe files.
Finally click “Run” and the program will be downloaded which will fix the problem and restart the computer.
Get more information :http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/dc1ac24f-b18f-48e4-ad45-7554cb9773fe
windows 7 black screen, I fully understand the directions for seting up a genuine copy of windows 7, however i've missed the deadline for comfirming a genuine copy of windows 7 is there any way to resolve this problem or will i have to download another copy
notice that this copy of windows 7: is AKA (windows 7 ultimate) any and all help apprecatied, thank you
Solution :
You may also face the Black Screen on your PC after you have logged on to your computer.
In this case the only thing that you might find is the My Computer Explorer Window.
To fix this problem, restart the computer and wait till the black screen is visible.
After verifying that the PC is connected with the net press simultaneously the CTRL, ALT, and DEL key.
Now click the Application Tab on the Task Manager and then on the New Task.
Here you have to type the command “C:\Program Files\Internet Explorer\iexplore.exe” along with the website name within “ ” from where you want to download the iexplorer.exe files.
Finally click “Run” and the program will be downloaded which will fix the problem and restart the computer.
Get more information :http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/dc1ac24f-b18f-48e4-ad45-7554cb9773fe
Thursday, July 28, 2011
Fix Error in Installing Office 2010
Problem :
Cannot install Office 2010. Side by side configuration error? Check Application Event Log? Took it to Staples, they couldn't figure it out. Using OpenOffice to write documents. Maybe I should say can install it vut can't get into word, access, power point...It's Office trial, 6 months
Solution :
If you have installed previous version of Office, or Office 2010 trial, you need completely uninstall Office (program and registry key) before install Office 2010.
You can refer to this KB article, and follow these steps to uninstall Office
“How do I uninstall Office 2003, Office 2007 or Office 2010 suites if I cannot uninstall it from Control Panel?”
http://support.microsoft.com/kb/290301
Get more information : http://social.technet.microsoft.com/Forums/en-US/outlook/thread/2723b7a4-4d0f-4ac7-9336-0495186e2b83
Cannot install Office 2010. Side by side configuration error? Check Application Event Log? Took it to Staples, they couldn't figure it out. Using OpenOffice to write documents. Maybe I should say can install it vut can't get into word, access, power point...It's Office trial, 6 months
Solution :
If you have installed previous version of Office, or Office 2010 trial, you need completely uninstall Office (program and registry key) before install Office 2010.
You can refer to this KB article, and follow these steps to uninstall Office
“How do I uninstall Office 2003, Office 2007 or Office 2010 suites if I cannot uninstall it from Control Panel?”
http://support.microsoft.com/kb/290301
Get more information : http://social.technet.microsoft.com/Forums/en-US/outlook/thread/2723b7a4-4d0f-4ac7-9336-0495186e2b83
Wednesday, July 27, 2011
Youtube Videos Keep Crashing on Internet Browsers
Problem :
Every time I try to watch a youtube video, it crashes my google chrome, I tried using Safari, but it did exactly the same thing, it freezes for a while, and then it comes up with shockwave player is unresponsive. i've done everything all the other questions suggested, i restarted, i cleared my cache and i made sure i had the latest version of shockwave, is there any other possible reason why this is happening???????
Solution :
It is possible that you may face the problem of YouTube crash due to memory leak in the web browser. The browser will get memory leak issues due to the web cache or history increased in great amount. The simultaneous opening of large number of videos in YouTube fills up the browser cache. You can clear the browser cache and web history to fix the issue. It requires much space for playing YouTube video. You can access the web history from the menu bar of browser and can remove these entries. It is also possible to use some history removal tools for this purpose.
Get more information : http://answers.yahoo.com/question/index?qid=20110726020013AAnWhq3
Every time I try to watch a youtube video, it crashes my google chrome, I tried using Safari, but it did exactly the same thing, it freezes for a while, and then it comes up with shockwave player is unresponsive. i've done everything all the other questions suggested, i restarted, i cleared my cache and i made sure i had the latest version of shockwave, is there any other possible reason why this is happening???????
Solution :
It is possible that you may face the problem of YouTube crash due to memory leak in the web browser. The browser will get memory leak issues due to the web cache or history increased in great amount. The simultaneous opening of large number of videos in YouTube fills up the browser cache. You can clear the browser cache and web history to fix the issue. It requires much space for playing YouTube video. You can access the web history from the menu bar of browser and can remove these entries. It is also possible to use some history removal tools for this purpose.
Get more information : http://answers.yahoo.com/question/index?qid=20110726020013AAnWhq3
Fix Windows 7 Printer Spooler Error
Problem :
I have done everything that windows has asked and still can't get it to work. I have a windows 7 printer but since I can't keep the spooler running it won't let me install it. I have tried manually and using the fix it program but all that does is restart the service and it will stop on it's own. Please help me!!!! I have to be able to print and I can't get it to print and this is driving me crazy.
Solution :
Go to Start / Run and type in "services.msc" without quotation marks, then press Enter or click OK.
In the window that opens (Services) look for "Print Spooler" on the right
Right-click "Print Spooler" and select "Properties".
Click on the "Recovery" tab and change all 3 drop-down boxes to "Restart The Service".
Make sure the 2 text boxes underneath say "1" in them.
Click Ok until you are back at the Services window, close it and you're good to go.
Go back into the properties of the "Print Spooler" tab and be sure to click Start to restart the Print Spooler service and it will restart the service immediately.
The Print spooler depends on the Remote Procedure Call (RPC) service. Is this service disabled? Go to services.msc look for RPC. Check state: Automatic
Get more information : http://www.tomshardware.com/forum/14498-63-print-spooler-wont-stay-running-windows
I have done everything that windows has asked and still can't get it to work. I have a windows 7 printer but since I can't keep the spooler running it won't let me install it. I have tried manually and using the fix it program but all that does is restart the service and it will stop on it's own. Please help me!!!! I have to be able to print and I can't get it to print and this is driving me crazy.
Solution :
Go to Start / Run and type in "services.msc" without quotation marks, then press Enter or click OK.
In the window that opens (Services) look for "Print Spooler" on the right
Right-click "Print Spooler" and select "Properties".
Click on the "Recovery" tab and change all 3 drop-down boxes to "Restart The Service".
Make sure the 2 text boxes underneath say "1" in them.
Click Ok until you are back at the Services window, close it and you're good to go.
Go back into the properties of the "Print Spooler" tab and be sure to click Start to restart the Print Spooler service and it will restart the service immediately.
The Print spooler depends on the Remote Procedure Call (RPC) service. Is this service disabled? Go to services.msc look for RPC. Check state: Automatic
Get more information : http://www.tomshardware.com/forum/14498-63-print-spooler-wont-stay-running-windows
Tuesday, July 26, 2011
Fix HP Network Printer Offline Error
Problem :
I have an HP J6480 all-in-one printer that is connected to a wireless network. The printer is indicating offline all the time recently. It was sporatic before and I could get it online by powering off and then on. I am having no luck getting it back online in my wireless system. it will print when coneected directly to my laptop. Any suggestions?
Solution :
Auto continue provides two settings, off and on (the default).
If the printer is on a network, it should probably be set to ‘On‘.
The on setting causes the message which appears on the printer control panel display, and the printer goes offline for ten seconds, before returning online if an error occurs that prevents printing.
The ‘Off‘ setting causes the messages to remain on the printer control panel display, and the printer to remain offline until ‘Select‘ is pressed, if an error occurs that prevents printing.
Get more information : http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/HP-J6480-All-in-One-Printer-offline-in-wireless-network-and-can/m-p/765273
I have an HP J6480 all-in-one printer that is connected to a wireless network. The printer is indicating offline all the time recently. It was sporatic before and I could get it online by powering off and then on. I am having no luck getting it back online in my wireless system. it will print when coneected directly to my laptop. Any suggestions?
Solution :
Auto continue provides two settings, off and on (the default).
If the printer is on a network, it should probably be set to ‘On‘.
The on setting causes the message which appears on the printer control panel display, and the printer goes offline for ten seconds, before returning online if an error occurs that prevents printing.
The ‘Off‘ setting causes the messages to remain on the printer control panel display, and the printer to remain offline until ‘Select‘ is pressed, if an error occurs that prevents printing.
Get more information : http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/HP-J6480-All-in-One-Printer-offline-in-wireless-network-and-can/m-p/765273
HP Laptop Blue Screen Error
Problem :
My 1 month old dv6 3043tx freezes up very often while playing music and then a blue screen appears and the lap restarts.
Also the lap is very sluggy while running all applications.I have scanned the hard drive for viruses using norton and found nothing.Is this a windows problem or a hardware problem?Help appreciated!!!
Solution :
You can try booting the computer into safe mode and check if you are able to boot, here are the steps:
1. Restart your computer if it is powered on.
2. Tap the F8 key after your computer initially powers on.
3. Once you see the Advanced Boot Options menu you can stop tapping.
4. Use the up/down arrow keys to highlight your selection.
5. Select Safe Mode and press Enter.
6. You should see drivers loading, and then please wait.
7. You should then be at the Welcome Screen.
8. Log on to your computer using an account with Administrator privileges.
If you are able to boot the computer in safe mode, then try system restore from safe mode .
Get more information : http://h30434.www3.hp.com/t5/Notebook-Lockups-Freezes-Hangs/Hp-laptop-blue-screen-error/m-p/743601
My 1 month old dv6 3043tx freezes up very often while playing music and then a blue screen appears and the lap restarts.
Also the lap is very sluggy while running all applications.I have scanned the hard drive for viruses using norton and found nothing.Is this a windows problem or a hardware problem?Help appreciated!!!
Solution :
You can try booting the computer into safe mode and check if you are able to boot, here are the steps:
1. Restart your computer if it is powered on.
2. Tap the F8 key after your computer initially powers on.
3. Once you see the Advanced Boot Options menu you can stop tapping.
4. Use the up/down arrow keys to highlight your selection.
5. Select Safe Mode and press Enter.
6. You should see drivers loading, and then please wait.
7. You should then be at the Welcome Screen.
8. Log on to your computer using an account with Administrator privileges.
If you are able to boot the computer in safe mode, then try system restore from safe mode .
Get more information : http://h30434.www3.hp.com/t5/Notebook-Lockups-Freezes-Hangs/Hp-laptop-blue-screen-error/m-p/743601
Monday, July 25, 2011
Fix Windows 7 Youtube Freezes Problem
Problem :
I had Windows XP installed on my laptop before I installed Windows 7. When I had Windows XP installed I wouldn't have any problems. I tried youtube on both Mozilla FireFox and Internet Explorer each time it froze my computer about halfway though the movie.
Solution :
1) Test your Flash and Javascript from the following web pages respectively.
http://www.youtube.com/swf_test.html
http://www.rcrt.co.uk/onlinetools/browsers/javascripttester.jsp
(2) After you restarting the browser check for the addons required for playing the video are enabled or not. To view them goto Internet Options, select Programs Tab and click on Manage Addons.
(3) Try by uninstalling any newly installed softwares or some software which you think those might causing problem or try by System Restore.
And, for 64 bit browsers the Addons are not available yet, try 32 bit browsers.
http://social.technet.microsoft.com/Forums/da-DK/w7itproappcompat/thread/ade189b5-9f43-4cc1-969f-407f9ea91199
Get more information :http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/youtube-videos-freezes-windows-7/35d0030d-f6ce-454b-bac5-3a952938268d
I had Windows XP installed on my laptop before I installed Windows 7. When I had Windows XP installed I wouldn't have any problems. I tried youtube on both Mozilla FireFox and Internet Explorer each time it froze my computer about halfway though the movie.
Solution :
1) Test your Flash and Javascript from the following web pages respectively.
http://www.youtube.com/swf_test.html
http://www.rcrt.co.uk/onlinetools/browsers/javascripttester.jsp
(2) After you restarting the browser check for the addons required for playing the video are enabled or not. To view them goto Internet Options, select Programs Tab and click on Manage Addons.
(3) Try by uninstalling any newly installed softwares or some software which you think those might causing problem or try by System Restore.
And, for 64 bit browsers the Addons are not available yet, try 32 bit browsers.
http://social.technet.microsoft.com/Forums/da-DK/w7itproappcompat/thread/ade189b5-9f43-4cc1-969f-407f9ea91199
Get more information :http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/youtube-videos-freezes-windows-7/35d0030d-f6ce-454b-bac5-3a952938268d
How to Reinstall Windows 7 on Acer Aspire One Netbook
Problem :
Hello,
My Acer Aspire One wont load windows fully so how to i reload windows 7? Thank you
Solution :
Check the following steps to reinstall the windows 7 :
STEP 1- Hardware Requirements
Make sure that your computer meets the minimum system requirements for Windows 7 such as, 1 GHZ processor, 1 GB of memory, 15 GB+ or hand drive space and DVD R\W drive.
STEP 2- Data Backup
Insert CD or an external hard drive into CD drive and perform back up of your data for further use.
STEP 3- Insert Windows 7 CD
Insert Windows CD into your CD drive and click on the option “Install Windows 7”.It offers you with two options. One of the options is “upgrade” and the other one is “Fresh installation”. Click on “Fresh installation”.
STEP 4- Accept Terms and Conditions
After clicking on “Fresh installation” it prompts you accept all license terms. Read carefully all license terms and conditions and click on “I accept”.
STEP 5- Installation partition
Choose the installation partition to install Windows 7 O.S. It prompts you to select the particular partition, such as C drive to install you Windows 7 operating setup.
By following the above specified instructions, you will able to reinstall Windows 7 operating system efficiently in your system.
Get more information : http://www.tomshardware.com/forum/59586-35-reinstall-windows-acer-aspire-netbook
Hello,
My Acer Aspire One wont load windows fully so how to i reload windows 7? Thank you
Solution :
Check the following steps to reinstall the windows 7 :
STEP 1- Hardware Requirements
Make sure that your computer meets the minimum system requirements for Windows 7 such as, 1 GHZ processor, 1 GB of memory, 15 GB+ or hand drive space and DVD R\W drive.
STEP 2- Data Backup
Insert CD or an external hard drive into CD drive and perform back up of your data for further use.
STEP 3- Insert Windows 7 CD
Insert Windows CD into your CD drive and click on the option “Install Windows 7”.It offers you with two options. One of the options is “upgrade” and the other one is “Fresh installation”. Click on “Fresh installation”.
STEP 4- Accept Terms and Conditions
After clicking on “Fresh installation” it prompts you accept all license terms. Read carefully all license terms and conditions and click on “I accept”.
STEP 5- Installation partition
Choose the installation partition to install Windows 7 O.S. It prompts you to select the particular partition, such as C drive to install you Windows 7 operating setup.
By following the above specified instructions, you will able to reinstall Windows 7 operating system efficiently in your system.
Get more information : http://www.tomshardware.com/forum/59586-35-reinstall-windows-acer-aspire-netbook
Wednesday, July 20, 2011
Fix Windows 7 Wireless Printer Offline Error
Problem :
I have a wireless printer installed and am running my laptop with Windows 7. Everytime I reboot the laptop, it fails to find the printer and marks it as offline. Sometimes I can restore it by deleting and then re-adding the printer from the control panel. The printer is a new HP wireless model, and I have installed the driver successfully, I should not have to re-install this everytime. Is this a Windows 7 issue, and how do I solve it?
Solution :
The solution to fix windows 7 printer offline error is to check the proper connection of the printer.
Two options exist to turn off the offline mode.
If you choose the first option to change the offline state of the printer, then go to Control Panel and then ‘Printer and Faxes’ option on the Control Panel.
Double-click on the printer you want to change to online mode from the displayed window.
A pop-up window will open and you need to select ‘Uncheck Printer Offline‘ option from the menu bar.
Get more information : http://www.tomshardware.com/forum/21381-63-wireless-printer-offline-windows
http://www.tomshardware.com/forum/15939-63-wireless-printer-offline-windows
I have a wireless printer installed and am running my laptop with Windows 7. Everytime I reboot the laptop, it fails to find the printer and marks it as offline. Sometimes I can restore it by deleting and then re-adding the printer from the control panel. The printer is a new HP wireless model, and I have installed the driver successfully, I should not have to re-install this everytime. Is this a Windows 7 issue, and how do I solve it?
Solution :
The solution to fix windows 7 printer offline error is to check the proper connection of the printer.
Two options exist to turn off the offline mode.
If you choose the first option to change the offline state of the printer, then go to Control Panel and then ‘Printer and Faxes’ option on the Control Panel.
Double-click on the printer you want to change to online mode from the displayed window.
A pop-up window will open and you need to select ‘Uncheck Printer Offline‘ option from the menu bar.
Get more information : http://www.tomshardware.com/forum/21381-63-wireless-printer-offline-windows
http://www.tomshardware.com/forum/15939-63-wireless-printer-offline-windows
Windows 7 Flash Drive Problem
Problem :
When I attached the flash drive to windows 7 it read it install the right drivers and said it was ready. The problem is that when I clicked on "my computer" i did not see it and then when I went to "Devices" in "Control Panel" it was there. I even tried uninstalling and reinstalling the drive to see if that help but i did not and I also tried to update but it was up to date. I dont know what to do the computer knows it is there but does not show it as a Drive.
Solution :
Before storing Windows 7 Operating System into the USB flash drive, you need to make your flash drive free from the virus. And also check the storage capacity of USB flash drive. Encounter the USB port connectivity in your system and you might check the compatibility of the USB device.
Get more information : http://social.technet.microsoft.com/Forums/en-US/w7itprohardware/thread/62d0e337-a2d7-4980-abc7-d57097debb3a/
When I attached the flash drive to windows 7 it read it install the right drivers and said it was ready. The problem is that when I clicked on "my computer" i did not see it and then when I went to "Devices" in "Control Panel" it was there. I even tried uninstalling and reinstalling the drive to see if that help but i did not and I also tried to update but it was up to date. I dont know what to do the computer knows it is there but does not show it as a Drive.
Solution :
Before storing Windows 7 Operating System into the USB flash drive, you need to make your flash drive free from the virus. And also check the storage capacity of USB flash drive. Encounter the USB port connectivity in your system and you might check the compatibility of the USB device.
Get more information : http://social.technet.microsoft.com/Forums/en-US/w7itprohardware/thread/62d0e337-a2d7-4980-abc7-d57097debb3a/
Tuesday, July 19, 2011
Fix Printer Error 79.00FE Message
Problem :
When I print some PDFs on my HP 4050 or 8000 printer, including some PDFs that I created using Adobe Distiller 5.0 using the default "Print" job option (Acrobat 4.0(PDF 1.3) Compatibility), I have the 79.00 FE PRINTER ERROR. My systems support person says that this Compatibility thing is eqivalent to PostScript Level. And our HP 8000 and HP 4050 laser printers do not support PostScript 3; they support only PostScript 2. Because I create the PDFs using 4.0 Compatibility (same as PostScript Level 4?), I am not going to be able to print them on these printers. However, they can be printed on HP 4100, which supports PostScript 3 (even though not Compatbility/PostScript 4). Now my Distiller 5.0 (presumably any higher version too) does not support anything lower than Compatibility 3.0 - it cannot create a PDF of Compatibility 2.1 for example. Now, is Adobe so stupid that it removes this PostScript 2 support from Distiller such that the PDFs it creates cannot be printed on certain printers? Any cure? Any comment?
Solution :
In order to fix the 79.00FE printer error, first you have to print a configuration page. Then remove the jet direct and power on while holding the go button down on the printer. After display reads offline, the reset process is complete. After the cold reset, remove the jet direct card and see if the 79.00FE error goes away. If the 79.00FE error appears before a job is sent then it may be the DIMMS, try removing them to see if the error persists.
Get more information : http://www.tomshardware.com/forum/11377-2-remove-00fe-error-message
When I print some PDFs on my HP 4050 or 8000 printer, including some PDFs that I created using Adobe Distiller 5.0 using the default "Print" job option (Acrobat 4.0(PDF 1.3) Compatibility), I have the 79.00 FE PRINTER ERROR. My systems support person says that this Compatibility thing is eqivalent to PostScript Level. And our HP 8000 and HP 4050 laser printers do not support PostScript 3; they support only PostScript 2. Because I create the PDFs using 4.0 Compatibility (same as PostScript Level 4?), I am not going to be able to print them on these printers. However, they can be printed on HP 4100, which supports PostScript 3 (even though not Compatbility/PostScript 4). Now my Distiller 5.0 (presumably any higher version too) does not support anything lower than Compatibility 3.0 - it cannot create a PDF of Compatibility 2.1 for example. Now, is Adobe so stupid that it removes this PostScript 2 support from Distiller such that the PDFs it creates cannot be printed on certain printers? Any cure? Any comment?
Solution :
In order to fix the 79.00FE printer error, first you have to print a configuration page. Then remove the jet direct and power on while holding the go button down on the printer. After display reads offline, the reset process is complete. After the cold reset, remove the jet direct card and see if the 79.00FE error goes away. If the 79.00FE error appears before a job is sent then it may be the DIMMS, try removing them to see if the error persists.
Get more information : http://www.tomshardware.com/forum/11377-2-remove-00fe-error-message
HP Deskjet Compatible Printer Driver for Windows 7
Problem :
I am using Windows 7 Home Premium 64-bit operating system. I already had hp 1280C printer in my office. I am unable to connect to it through network because the drivers are not matching to the latest operating system. Can I still install and configure my hp 1280 printer in my laptop using any of the compatible printer drivers.
Solution :
Go to Hewlett Packard - Enter the product name / number. Be sure to check the additional information, like how to install the driver or troubleshooting guides.
For more information : http://www.tomshardware.com/forum/57438-3-deskjet-1280-compatible-printer-driver-windows
I am using Windows 7 Home Premium 64-bit operating system. I already had hp 1280C printer in my office. I am unable to connect to it through network because the drivers are not matching to the latest operating system. Can I still install and configure my hp 1280 printer in my laptop using any of the compatible printer drivers.
Solution :
Go to Hewlett Packard - Enter the product name / number. Be sure to check the additional information, like how to install the driver or troubleshooting guides.
For more information : http://www.tomshardware.com/forum/57438-3-deskjet-1280-compatible-printer-driver-windows
Monday, July 18, 2011
Fix WIndows 7 Audio Driver Problems
Problem :
I have HP dv5000 series laptop,running a Turion 64 bit processor,2 gb of ddr ram,80 gig hard drive...64bit versions of Vista Ultimate and also Windows7 build 7100 RC installed,(all on separate hard drives).
Sound card will not start....I also have another hard drive with XP pro installed which runs flawlessly...I have backed up all XP drivers and loaded on a flash drive and have set the update drivers in both Vista and Win 7 to install drivers for the sound card using the XP drivers with no progress...Hp has been contacted and was told that the hp dv5000 series is discontinued and no further information or drivers are available.
I also contacted the maker of the sound card which is Altec Lansing and was told to contact HP for a new driver package.
Catch 22...lol
Is there any way to install this Altec Lansing sound card to be compatable with Vista and Win7?
I see no other option other than give up on this HP product and get a new laptop.
Solution :
I would suggest you to follow the steps as below to fix Windows 7 Audio Driver Problem and check if it helps.
Step 1:
1. ClickStart and type gpedit.msc in the Start Search and pressEnter.
2. OnceLocal Group Policy Editor is open navigate to:
Computer Configuration > Administrative Templates > System > Driver Installation
3. On the right pane, double click on“Turn Off Windows Update Device Driver Search Prompt” and selectEnabled and click OK.
4. Restart the computer and check if the issue persists.
Note: This will not disable the Windows Update; it will only stop prompting you to update the device driver using Windows Update. You will still be able to update the driver by manually going to Windows Update.
Step 2:
Uninstall audio drivers completely and then install the driver that is working.
1. Click Start,type Device Manager in the Start Search box, and then pressENTER.
2. In the Device Manager dialog box, expandSound, video, and game controllers.
3. Locate the audio device that was included with the computer.
3. Right-click the device, and then clickProperties.
4. Click theDriver tab, and then click Uninstall.
5. Place a check mark next to"Delete the Driver Software for this device" check box, and then click OK.
6. Install the driver that is working.
7. Restart the computer and check if the issue persists.
Hope this helps
Get more information : http://social.technet.microsoft.com/Forums/en/w7itprohardware/thread/a4dee814-0c78-48de-98c9-7d8034cf5b38
I have HP dv5000 series laptop,running a Turion 64 bit processor,2 gb of ddr ram,80 gig hard drive...64bit versions of Vista Ultimate and also Windows7 build 7100 RC installed,(all on separate hard drives).
Sound card will not start....I also have another hard drive with XP pro installed which runs flawlessly...I have backed up all XP drivers and loaded on a flash drive and have set the update drivers in both Vista and Win 7 to install drivers for the sound card using the XP drivers with no progress...Hp has been contacted and was told that the hp dv5000 series is discontinued and no further information or drivers are available.
I also contacted the maker of the sound card which is Altec Lansing and was told to contact HP for a new driver package.
Catch 22...lol
Is there any way to install this Altec Lansing sound card to be compatable with Vista and Win7?
I see no other option other than give up on this HP product and get a new laptop.
Solution :
I would suggest you to follow the steps as below to fix Windows 7 Audio Driver Problem and check if it helps.
Step 1:
1. ClickStart and type gpedit.msc in the Start Search and pressEnter.
2. OnceLocal Group Policy Editor is open navigate to:
Computer Configuration > Administrative Templates > System > Driver Installation
3. On the right pane, double click on“Turn Off Windows Update Device Driver Search Prompt” and selectEnabled and click OK.
4. Restart the computer and check if the issue persists.
Note: This will not disable the Windows Update; it will only stop prompting you to update the device driver using Windows Update. You will still be able to update the driver by manually going to Windows Update.
Step 2:
Uninstall audio drivers completely and then install the driver that is working.
1. Click Start,type Device Manager in the Start Search box, and then pressENTER.
2. In the Device Manager dialog box, expandSound, video, and game controllers.
3. Locate the audio device that was included with the computer.
3. Right-click the device, and then clickProperties.
4. Click theDriver tab, and then click Uninstall.
5. Place a check mark next to"Delete the Driver Software for this device" check box, and then click OK.
6. Install the driver that is working.
7. Restart the computer and check if the issue persists.
Hope this helps
Get more information : http://social.technet.microsoft.com/Forums/en/w7itprohardware/thread/a4dee814-0c78-48de-98c9-7d8034cf5b38
Windows 7 Extremely Slow on Start Up
Problem :
I have Windows 7 installed on 2 computers. 1st was a clean install on a Gateway laptop (about 3 yrs old) Everything worked perfectly. Start up is very fast and I have NO complaints.
2nd was an install in my brand new HP HDX18 - Quad Core, 8gb mem, 2 hard drives, etc. Startup is taking 10+ min. I have disabled all startup services (except msft), I dont have any external hd's attached at the time of boot up, I set my coputer to use original boot config. I am running out of things to try. Any ideas....
Solution :
What I noticed after evaluating windows on different machine.
1st machine was a clean one the system Windows 7 worked properly without any problem on the performance issue. I also had installed several applications, and different kind of documents to make sure that the system worked properly. there was no a real issue of performace even after reboott the system several time.
howerver the second machine had windows vista ultimate on it. after an upgrade from vista to windows 7 I noticed that there is a real poor performance on the system. I had to wait more that 10 minutes just to make sure that all the drivers and services are all loaded still the system was poorly performing. and sometimes certain applications do not respond. this was the first test. on the same machine I reformat the system and installed windows 7 re-install all the necessary applications and restore all the document. the system was performing properly. unfortunately I advice that the minimum memory requirement should be two GB to properly running windows 7 Hope that with the final version of Windows 7 Microsoft will take into consideration the following issue:
1- Better performance in comparaison with Windows Vista
2 Security issue need to be tackle seriously this time
3- Compatibility with certain application that run only on older version
4- Networking issue specially the sharing application
Get more information : http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/9e9ac1f6-d028-421a-b35a-e9569add54c4
I have Windows 7 installed on 2 computers. 1st was a clean install on a Gateway laptop (about 3 yrs old) Everything worked perfectly. Start up is very fast and I have NO complaints.
2nd was an install in my brand new HP HDX18 - Quad Core, 8gb mem, 2 hard drives, etc. Startup is taking 10+ min. I have disabled all startup services (except msft), I dont have any external hd's attached at the time of boot up, I set my coputer to use original boot config. I am running out of things to try. Any ideas....
Solution :
What I noticed after evaluating windows on different machine.
1st machine was a clean one the system Windows 7 worked properly without any problem on the performance issue. I also had installed several applications, and different kind of documents to make sure that the system worked properly. there was no a real issue of performace even after reboott the system several time.
howerver the second machine had windows vista ultimate on it. after an upgrade from vista to windows 7 I noticed that there is a real poor performance on the system. I had to wait more that 10 minutes just to make sure that all the drivers and services are all loaded still the system was poorly performing. and sometimes certain applications do not respond. this was the first test. on the same machine I reformat the system and installed windows 7 re-install all the necessary applications and restore all the document. the system was performing properly. unfortunately I advice that the minimum memory requirement should be two GB to properly running windows 7 Hope that with the final version of Windows 7 Microsoft will take into consideration the following issue:
1- Better performance in comparaison with Windows Vista
2 Security issue need to be tackle seriously this time
3- Compatibility with certain application that run only on older version
4- Networking issue specially the sharing application
Get more information : http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/9e9ac1f6-d028-421a-b35a-e9569add54c4
Subscribe to:
Posts (Atom)